NTN 2222K Self Aligning Ball Bearings

Cap bolt recommended tightening torque:1735.4 N·m; ba:80.169 mm; Ca:101.803 mm; A2:276.225 mm; Da:339.999 mm; Housing:SSAFS 044 KA; da:201.613 mm; H2:79.375 mm; Bearing:23044 CCK/W33; Initial grease fill:1672.65 g;

Calculation factor f2A:1; Basic static load rating C0:2.45 kN; Calculation factor f2B:1.03; D:35 mm; da min.:19 mm; Calculation factor fHC:1.01; Preload class B GB:150 N; r3,4 min.:0.15 mm; d2:21.1 mm; Static axial stiffness, preload class B:76 N/µm;

Mass bearing unit:8.62 kg; J min.:209.55 mm; A1:99.219 mm; L:266.7 mm; d2:101.6 mm; J max.:225.425 mm; H2:41.275 mm; A:88.9 mm; Basic dynamic load rating C:147 kN; da:61.913 mm;

Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4300 rpm; Width Plain C2:133000 N; D:170.0000 mm; B:64.00 mm; Shielded or Sealed Co2:118000 N; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating 40º C1:151000 N; Basic Static Radial Load Rating 15º Co1:

Initial grease fill:218.29 g; PosiTrac Plus contact element:2 x B10724-53; Housing:FSAF 517; da:73.025 mm; N1:19.05 mm; Pa:7.12 kN; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; A2:127 mm; Appropriate attachment bolt size G:0.625 in;

Static (Cor):11.1 mm; Oil:103.100 kN; Pu:805 kN; d:110 mm; with cylindrical bore:1 500 min-1; Grease:1000 kN; rs (min):3 mm; Dynamic (Cr):6 mm; with tapered bore:1 900 min-1; D:240 mm;

R2:21.431 mm; P90°:82.7 kN; Adapter sleeve assembly:SNW 16x2.11/16; H1:88.9 mm; L:330.2 mm; Labyrinth ring:2 x LOR 44; H2:31.75 mm; R1:53.181 mm; ba:33.337 mm; Cap bolt, SAE grade:8;

Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; d:45.000 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; Basic Static Radial Load Rating Co:45000 N; Sealed Speed Rating n3:4000 rpm; D:120.0000 mm; B:29.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Dynamic Radial Load Rating

Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:0 rpm; Accessories:One Seal; D:540.0000 mm; B:46.00 mm; d:440.000 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Oil Speed Rating Open/Shielded n2:1100 rpm; Basic Dynamic Radial Load Rating C:255000 N; Basic Static Radial Load Rating Co:405000 N;

d:55.000 mm; B:36.00 mm; Oil Speed Rating n2:6600 rpm; Basic Dynamic Radial Load Rating C:47500 N; Fillet Radius rb:0.60 mm; D:90.0000 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:51000 N;

Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; Accessories:Two Seals & Snap-Rin; Oil Speed Rating n2:9500 rpm; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:30300 N; d:30.000 mm; B:27.00 mm;

B:17.5 mm; da min.:535 mm; Basic static load rating C0:6700 kN; D:560 mm; Da max.:485 mm; d1:557 mm; Fatigue load limit Pu:450 kN; Minimum axial load factor A:3.6; Mass bearing:31.5 kg; Reference speed:320 r/min;

D:12.7000 mm; Oil Speed Rating Open/Shielded n2:69000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:490 N; Sealed Speed Rating n3:40000 rpm; Grease Speed Rating Open/Shielded n1:57000 rpm; Accessories:One Shield; Width Plain B:4.0 mm; d:4.800 mm;

Mass housing washer:1.04 kg; r1,2 min.:1.1 mm; D:170 mm; B:12 mm; D1:123 mm;

Basic Dynamic Radial Load Rating C:13300 N; Fillet Radius ra:1.00 mm; d:30.000 mm; D:55.0000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:8000 rpm; B:13.00 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating