ISOSTATIC B-57-10 Sleeve Bearings

C0:20.8 kN; C:31.85 kN; A:31 mm; B1:43.7 mm; d:41.28 mm; SW:3.97 mm; H:110 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; A5:19.2 mm;

T max.:200 °C; A:10.5 mm; Weight:1.68 kg; B:43.5 mm; s1:21.75 mm; A2:32.6 mm; d:49.21 mm; C:35.1 kN; H:155.6 mm; T min.:-20 °C;

d:36.51 mm; Designation of open end cover:SCOU207-23; H2:91.5 mm; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN; s1:21.45 mm; J:129 mm; N:14mm; G:M6x1; S:17.5 mm;

LangID:1; dd min:110; ALPHA_:0; D_:150; hidTable:ecat_NSCLDR; KBRG:4162; DI_:100.5; DA_:18; hidYobi:NUP2217ET; yobi:NUP2217ET;

J:157 mm; A1:18 mm; Designation of bearing:EX210-30G2; B1:62.7 mm; Weight:2.5 kg; C0:23.2 kN; L:115 mm; s1:42.9 mm; C:35.1 kN; A2:60.1 mm;

Z:63.3 mm; A:38 mm; Designation of closed end cover:SCCE204; Designation of open end cover:SCOE204-12; L1:21 mm; d1:32.4 mm; S:17 mm; N:M8; Dz:54 mm; B:34 mm;

W2:56 mm; m:160 mm; Brand:SNR; h:60 mm; N:14 mm; D1:113 mm; a:180 mm; Cover bolts:M6x20; recommended torque:65 Nm; D:85 mm;

A1:23 mm; d:23.81 mm; Designation of housing:PA205-; L:84 mm; T min.:-20 °C; H:36.5 mm; H1:12 mm; H2:72 mm; S:14.3 mm; G:M6x1;

b min:2.7 mm; rs min:1.5 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; D4 max:96.5 mm; ra max:1.5 mm; a min:3.07 mm; rNa max:0.5 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; d:40 mm; Static load, C0:24 kN;

Characteristic rolling element frequency, BSF:4.64 Hz; cage material:Nylon; Static load, C0:71 kN; number of rows:1; Weight / Kilogram:0.494; da max:45 mm; Category:Roller Bearings; Brand:NTN; Characteristic inner ring frequency, BPFI:7.84 Hz; r1a max:1 mm;

Designation of housing:FLE210N-; A1:13 mm; C0:23.2 kN; N:18mm; Weight:2.1 kg; T min.:-40 °C; Z:38.9 mm; B:51.6 mm; T max.:100 °C; Designation of bearing:UC210G2T04;

C0:15.2 kN; Designation of open end cover:SCOU207-23; s1:16 mm; B:32 mm; N:14mm; d:36.51 mm; Z:50.7 mm; T min.:-20 °C; C:25.7 kN; e:21 mm;

J:90 mm; s1:30.5 mm; Designation of bearing:EX204G2L4; A2:45.5 mm; Recommended tightening torque for set screw:5.5 Nm; G:R1/8"; B:34 mm; A:30.3 mm; C0:6.65 kN; d:20 mm;

Designation of housing:FL210N-; Dz:100 mm; B:51.6 mm; C:35.1 kN; S:19 mm; T min.:-20 °C; Designation of bearing:UC210-30G2T20; A1:16 mm; e:22 mm; Weight:2.39 kg;

Designation of housing:FCE211-; B:45.3 mm; Recommended tightening torque for set screw:22 Nm; Weight:3.07 kg; H3:125; d:55 mm; A2:33.5 mm; N:18mm; T max.:200 °C; T min.:-20 °C;